Adjusting The Volume; Setting The Clock; Setting Radio Station Presets - Wagan Tech Power Dome NX 2485 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

User's Manual—Read before using this equipment
5. Tap the MEMORY button to switch to your station preset. Continue pressing
the button to cycle through each preset. See the section on setting radio
station presets.
6. When finished, press and hold the ON/OFF button for at least 1 second to
turn off the radio and return to Clock Mode. Carefully retract the antenna
and return it to the lowered position.

ADJUSTING THE VOLUME

1. With the radio turned on, Tap the VOL + and VOL − buttons to adjust the
volume. Press and hold the buttons to adjust the volume quickly. The radio
can be adjusted by 16 levels.
2. When using an external audio device in the Audio Input Jack, the volume
will be controlled by the external device.

SETTING THE CLOCK

1. With the radio off and the Display showing in Clock Mode, tap the
MEMORY button.
2. The clock display will flash and enter Clock Set Mode.
3. Tap the CH + button to increase the hour. Hold the button continuously to
increase the adjustment speed. The display will switch from AM to PM and
PM to AM appropriately.
4. Tap the CH − button to increase the minutes. Hold the button continuously
to increase the adjustment speed.
5. Tap the MEMORY button again to confirm the new clock time, returning to
regular Clock Mode.

SETTING RADIO STATION PRESETS

1. While the radio is playing on the desired station, press and hold the
MEMORY button for at least 1 second to record the current station as a
preset.
2. When the "M" on screen flashes, tap the CH + and CH − buttons
repeatedly to select the desired memory position between 1–20.
3. Press and hold the MEMORY button once more to confirm the station
preset at that position. The radio will switch back to regular Radio Mode.
4. Repeat steps 1 to 3 for each desired preset.
5. When using the radio, tap the MEMORY button to select a preset. The
current preset is displayed on screen with the "M" and the preset number
1–20.
Wagan Tech and wagan.com are trademarks used by Wagan Corporation.
©2013 Wagan Corporation. All Rights Reserved.
8

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Power dome nx2485

Tabla de contenido