Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING YOUR OIL FILLED
RADIATOR
lace the heater on the floor at least 90 cm away from the
P
wall and any other objects such as furniture, curtains or
plants.
(Make sure the power supply used corresponds to the one
on the rating label)
With the thermostat control switch and the power setting
switches in the '0' position, plug the heater into the main
power supply.
1. Room temperature can be adjusted using the
thermostat simply. Turn the thermostat knob clockwise,
to increase the heat, and anti-clockwise to decrease the
heat, until you reach the desired temperature.
2. Switch the heater to one of the following power settings.
Model: NY-20G1 9 FINS
a. Push switch one (I) 800W
b. Push switch two (II) 1200W
c. Push switches one + two heat settings together:
2000W
EN
39
Publicidad
