Samsung POWERbot SR10M70 Serie Manual Del Usuario página 9

Accessories
or
Remote control
(Not included with
SR10M701✴✴✴ Series )
Docking station
✻ ✻ Refer to page 15 for the installation of boundary markers.
✻ ✻ Battery Spec
SR10M70✴✴✴✴ series : Lithium-ion, 21.6V, 1800mAh, 6cell
SR20M70✴✴✴✴ series : Lithium-ion, 21.6V, 3600mAh, 6cell
Installation note
Note
f Install the docking station in a place where the floor and wall are level.
f It is best to install the docking station along the grain of wooden floors.
f If the emergency switch is off, the POWERbot will not charge even if it is docked on the
docking station.
f Always turn on the power of the docking station.
– If power is not supplied to the docking station, the POWERbot cannot find it and cannot
automatically recharge.
– If the POWERbot is left detached from the docking station, the battery will drain naturally.
f If the POWERbot is in sleep mode, power will not come on even if the emergency switch
is turned off and then on. Press and hold the [Start/Stop] button on the POWERbot to turn
the sleep mode off.
VR7000_EN_DJ68-00763R-00_ZS.indd 9
Batteries (AAA type)
Power cord
ENGLISH-09
User manual
SR20M7070✴✴ series)
Boundary markers
Battery charger
SR20M7050✴✴ series)
Spare filter
(Only available
in SR20M7090✴✴,
(Only available
in SR20M7090✴✴,
SR20M7070✴✴,
SR20M706✴✴✴,
2017-07-07 오전 10:56:18