Bosch GEX12V-5 Instrucciones De Funcionamiento Y Seguridad página 4

be ejected from the battery, avoid
contact. If contact accidentally occurs,
flush with water. If liquid contacts
eyes, additionally seek medical help.
Liquid ejected from the battery may
cause irritation or burns.
e. Do not use a battery pack or tool that
is damaged or modified. Damaged or
modified batteries
unpredictable behavior resulting in fire,
explosion or risk of injury.
f. Do not expose a battery pack or tool to
fire or excessive
Exposure to fire or temperature above
265 °F may cause explosion.
g. Follow all charging instructions and do
not charge the battery pack or tool
Safety Rules for Random Orbital Sanders
a. Use clamps or another practical way to
secure and support the workpiece to a
stable platform. Holding the work by your
hand or against the body leaves it unstable
and may lead to loss of control.
b. Remove battery before changing
accessories. Accidental start-ups may
occur if battery is installed while
changing an accessory.
c. If your tool is equipped with a dust bag,
empty it frequently
completion of sanding. Be extremely
careful of dust disposal, materials in fine
particle form may be explosive. Do not
throw sanding dust on an open fire.
Spontaneous combustion may, in time,
result from mixture of oil or water with
dust particles.
d. Always wear eye protection and a dust
mask for dusty applications and when
sanding overhead. Sanding particles can
be absorbed by your eyes and inhaled
easily and
complications.
General Power Tool Safety Warnings
may
temperature.
and
may cause
outside
specified in the instructions. Charging
improperly or at temperatures outside
the specified range may damage the
battery and increase the risk of fire.
6. Service
exhibit
a. Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool
is maintained.
b. Never service damaged battery packs.
Service of battery packs should only be
performed by the manufacturer or
authorized service providers.
e. Do not wet sand with this sander.
Liquids entering the motor housing is an
electrical shock hazard.
f. Do not use PSA pad on random orbit
sanders
12,000/min. Exceeding the maximum
operating speed of pad may cause pad to
rupture or fly apart during use striking
user or bystanders.
g. Do not use sandpaper intended for
after larger sanding pads. Larger sandpaper
will extend beyond the sanding pad
causing snagging, tearing of the paper or
kick-back. Extra paper extending beyond
the sanding pad can also cause serious
lacerations.
h. Clamp or secure workpiece when
sanding.
prevents it from being ejected from
under the sander and leaves both hands
to control the tool.
health
-4-
the temperature
whose speed
Clamping the workpiece
range
exceeds