Functional Description; Functions Of The Thermal Imaging Camera - Dräger UCF 6000 Instrucciones De Uso

"Scan PLUS" application mode
"Visual" application mode
Custom 1 application mode
NOTICE
i i
If the last bar in the battery symbol starts flashing, a fully
charged battery should be inserted as soon as possible to
prevent the camera from switching off.
Dräger UCF 6000, UCF 7000, UCF 8000, UCF 9000
2.3

Functional description

2.3.1

Functions of the thermal imaging camera

The thermal imaging camera is a portable electronic device. It can be
used in fires and hazardous situations and in normal environments.
X
The thermal imaging camera is designed for use in heat, smoke and
spray water.
X
A brightness sensor adjusts the display brightness to the ambient
lighting conditions.
X
The thermal imaging camera has an automatic standby function. If the
thermal imaging camera is not held at the handle, the display initially
darkens by 50 %. The camera starts a countdown from 25 to 0, then
the display switches off. When the thermal imaging camera is held at
the handle, the display switches back on. You can use the supplied PC
software to disable the standby function.
The thermal imaging camera has a USB interface. Use a USB cable to
connect the thermal imaging camera to a PC. Live data of the thermal
imaging camera is then transferred to the computer. Use the supplied
computer software to change the basic settings of the thermal imaging
camera.
Use the supplied charging cradle for charging a rechargeable battery
in the thermal imaging camera or an additional rechargeable battery
(optional accessory). In stationary operation, the charging cradle can
be connected to the grid with a power supply unit that is included in the
delivery. A vehicle installation kit is available as an accessory for a
fixed installation in a vehicle. In this case, the charging cradle can be
connected to the power supply of the vehicle with a supplied
connection cable (included in the vehicle installation kit). If the thermal
imaging camera is used as a stationary device, it can be directly
connected to the power grid with the optional adapter.
Description
33