Symbols Description - PANCONTROL PAN MV-690A Manual De Instrucciones

- Disconnect the power supply and discharge the filter capacitors in the
power supply before measuring resistance or testing diodes.
- Always switch off the device and disconnect the test leads before opening
the device to replace batteries or fuses.
- Do not use the device outdoors, in humid surroundings or in
environments that are subjected to extreme temperature fluctuations.
- Do not store the device in places which are exposed to direct sunlight.
- If changes or modifications are made to the device, the operational safety
is no longer guaranteed and the warranty becomes void.
- Remove the battery if the device is not used for a long time.

4. Symbols Description

Conforms to the relevant European Union directive (EN-61010)
Product is protected by double insulation
Risk of Danger. Important information See instruction manual
Attention! Hazardous voltage. Risk of electric shock.
This product should not be disposed along with normal domestic
waste at the end of its service life but should be handed over at a
collection point for recycling electrical and electronic devices.
CAT I
This device is designed for measurements on electric circuits, which
are not directly connected to the public power grid like measurements
in circuits that are not derived from the power grid and specially
protected circuits that are derived from the power grid.
CAT II
The device is designed for making measurements in circuits that are
directly connected to the low voltage network electrically, for e.g.
measurements on household appliances, mobile tools and similar
devices.
EN 4