TRouBLESHooTing
WarninG: Turn the switch to the OFF position and unplug the drill from the power source
before you perform any troubleshooting procedures.
If you have any questions regarding this product, please call customer service at 1-888-3KOBALT,
8 a.m. - 8 p.m., EST, Monday - Friday.
Problem
The motor does not start.
The bit cannot be installed.
The motor is overheating.
5-YEAR HASSLE-fREE WARRAnTY
This drill is warranted to the original purchaser from the original purchase date for five (5) years
subject to the warranty coverage described herein.
This drill is warranted for the original user to be free from defects in material and workmanship.
If you believe that the drill is defective at any time during the specified warranty period, simply return
the drill along with proof of purchase to the place of purchase for a free replacement or refund, or call
1-888-3KOBALT (1-888-356-2258) for warranty service.
This warranty is void if: defects in materials or workmanship or damages result from repairs or
alterations which have been made or attempted by others or the unauthorized use of nonconforming
parts; the damage is due to normal wear, damage is due to abuse (including overloading of the tool
beyond capacity), improper maintenance, neglect or accident; or the damage is due to the use of the
tool after partial failure or use with improper accessories or unauthorized repair or alteration.
This warranty excludes accessories.
This warranty gives you specific legal rights, and you may also have other rights that vary from state
to state.
Possible Cause
The tool is not connected to a power
source.
1. The sleeve is not released.
2. The bit does not fit the chuck jaw.
Ensure cooling vents are free of dust
and obstacles.
13
CorreCTiVe aCTion
Connect the tool to a power
source.
1. Release the sleeve.
2. Use the appropriate bit.
Clean and clear the vents. Do
not cover the vents with your
hand during operation.
Printed in China