M 7402110302 17022021
WARNINGS
•
The product is designed and manufactured
according to DS/EN 60335-1.
•
This product is only for use in private
householdings, if used for other purposes
the warranty will be repealed.
•
Installation must be performed by a skilled
electrician in accordance with the specifica-
tions given by Thermex Scandinavia A/S
(Thermex) and legislation in force.
•
Thermex disclaims all responsibility with
regards to damages caused by wrong
installation, mounting or use.
BEFORE MOUNTING/cOMMISSIONING
•
Inspect the product for transport damages,
flaws and defects immediately after the
receipt.
•
Transport damages must be filed to the
haulage contractor and Thermex immediate-
ly after the receipt.
•
Flaws and defects must be filed to Thermex
within 8 days after the receipt, and not later
than mounting/commissioning.
ThERMEX PUREMEx 5
INSTALLATION
•
The device is designed to operate at
230/380 Volts ±10%~ 50 Hz.
•
The device must always be grounded.
•
Maximum range between receiver and trans-
mitter is 400 m (line of sight).
•
Maximum load on the connected device is 10
kW (<25 A per phase).
45