Safety Devices On The Product; Cutting Attachment - RedMax BTR250PL Manual Del Usuario

• Use gloves when necessary, for example when you
attach, examine or clean the cutting equipment.
• Use sturdy non-slip boots.
• Use clothing made of a strong fabric. Always use
heavy, long pants and long sleeves. Do not use
loose clothing that can catch on twigs and branches.
Do not wear jewelry, short pants, sandals or go with
bare feet. Put your hair up safely above shoulder
level.
• Keep first aid equipment close at hand.

Cutting attachment

WARNING: Remove the battery and make
sure the cutting attachment stops completely
before you work on any part of the cutting
attachment.
WARNING: Only use the cutting attachment
with the guards we recommend, see
Accessories on page 18 .
Trimmer head
• Always use the correct trimmer head and cutting
Accessories on page 18 . Also,
attachments, See
use the trimmer line we recommend, see the
assembly in the back of the Manual.
• Make sure that the cutter on the trimmer guard is
intact.
• Make sure that the trimmer line is wound tightly and
evenly around the drum to prevent dangerous
vibrations from the product. Different cord lengths
can result in unnecessary vibrations.Tap the trimmer
head to get correct length on the cord.
463 - 002 - 09.01.2018
To increase the life of the cord it can be soaked in water
for a couple of days before it is assembled. This will
make the cord tougher.

Safety devices on the product

WARNING: Read the warning instructions
that follow before you use the product.
In this section the product's safety features, its purpose
and how checks and maintenance should be carried out
to ensure that it operates correctly. See instructions
Product overview on page 2 to find
under the heading
where these parts are located on your product.
The life span of the product can be reduced and the risk
of accidents can increase if product maintenance is not
carried out correctly and if service and/or repairs are not
carried out professionally. If you need further information
please contact your nearest servicing dealer.
WARNING: Never use a product with
defective safety components. The product's
safety equipment must be inspected and
maintained as described in this section. If
your product fails any of these checks,
contact your service agent to get it repaired.
CAUTION: All servicing and repair work on
the machine requires special training. This is
especially true of the machine's safety
equipment. If your machine fails any of the
checks described below you must contact
your service agent. When you buy any of
our products we guarantee the availability of
professional repairs and service. If the
retailer who sells your machine is not a
servicing dealer, ask him for the address of
your nearest service agent.
To do a check of the keypad
1. Press and hold the start/stop button (A).
B
a) The product is switched on when the LED (B) is
lit.
b) The product is switched off when the LED (B) is
out.
Troubleshooting on page 15 if the warning
2. See
indicator (C) is lit or flashes.
C
A
7