How To Use The Product; Normal Menu - Televes 5096 Manual De Instrucciones

User manual

5. - HOW TO USE THE PRODUCT

Before programming the unit, it is
necessary to set this unit up either as an
Amplifier or as a Converter, according to
the needs of the installation.
To do this, it is necessary to access the
Extended Menu:
• By pressing the button for 3 seconds
• Then press twice.
• And follow the instructions in step c).
From this stage, it is also advisable to select
one of the operational modes: by frequency
or by channel number:
• Press three times.
• Follow the instructions in step b).
To configure/programme each Unit, follow
the next steps:

5.1 Normal Menu

5.1.1. - Output menu.
This is the menu displayed when the
programmer is inserted for the first time into
the front socket (PRGM) of the unit.
Unit used as an Amplifier:
• 7 segment LED's:
These will display (according to the
operational mode selected the last time)
the frequency of the video carrier:
or the output channel:
• LED indicators:
A B C
27
Analogue Channel Processor
Unit used as a Converter
• 7 segment LED's:
These will display the frequency of the
video carrier or the numbers of the
output channel (according
operational mode selected last time).
• LED indicators:
A B C
For example, in channel operational mode,
if the selected channel is 52, the display will
show:
Press or to change the channel.
To store data, press and keep it pressed
down for approximately 3 seconds: 4
dashes will indicate that the data has been
stored correctly.
Having selected the frequency operational
mode (e.g. the same channel no. 52, the
video carrier of which is 719.25 MHz) the
display will show:
to the