Publicidad
Enlaces rápidos
Publicidad
Resumen de contenidos para Kuat ONE BIKE ADD-ON NV 2.0
- Página 1 ONE BIKE ADD-ON NV 2.0 NV BASE 2.0 USER GUIDE...
- Página 2 Included Bottle Opener (2) Keys 8mm/6mm Allen Wrench (2) M8 Nut M10x150 Bolt M8x160 Bolt Rear Tire Tray Front Tire Tray Add-On Center Beam This User Guide covers the assembly and installation process for both the NV 2.0 One Bike Add-On, and the NV BASE 2.0 One Bike Add-On products.
- Página 3 Assembly: Align the trays with the holes on the center beam by matching the coordinating labels. Install (1) M8x160 bolt and (1) M8 nut using the provided 8mm Allen Wrench. Alternate between bolts when tightening. Repeat this step for the opposite, pre-installed M8x160 Bolt.
- Página 4 Tray Installation Overview M8x160 BOLT M8 NUT PRE-INSTALLED LEFT RIGHT M8 NUT M8x160 BOLT Installing Add-On Using the provided 6mm Allen Wrench, remove end cap by unscrewing the M10x135 bolt found on the end cap. NV 2.0 NV BASE 2.0 M10x135 TRAIL-DOC END CAP...
- Página 5 Install One Bike Add-On by aligning Add-On bolts with threaded holes found in the center beam of the NV / BASE 2.0. Using the provided 8mm Allen Wrench, alternate tightening bolts.
- Página 6 Using the 6mm Allen Wrench, reinstall end cap using the provided M10x150 bolt. Do not re-use original end cap bolt. NV 2.0 NV BASE 2.0 M10x150 M10x150 TRAIL-DOC END CAP END CAP Using the NV 2.0 Bike Lock If your NV 2.0 uses the side-entry cable lock system, follow Section 1 to ensure proper lock mechanism usage.
- Página 7 Section 1 Using the Side-Entry Lock System Pull the lock and cable out from the rear tire tray. NOTE: When re-inserting the lock cable into the rack there should be a positive engage between the cable and the magnet in the back of the tray. Loop the cable through the rear triangle and insert the lock tip into the lock found on the cable.
- Página 8 Section 2 Using the Rear-Entry NV Lock Slide lock assembly out of tray until cable is fully extended. When near full extension cable will catch. Pull again to fully seat cable into lock. Slide dust cover forward to access lock key core.
-
Página 9: Avertissements
• Do not take through automatic car wash. • Drive responsibly. If you have questions or problems, please contact Küat Racks directly by calling toll free 1(877)822-KUAT, or by email: info@kuatracks.com ADVERTENCIAS • Siga las instrucciones para un montaje, instalación y uso adecuados. - Página 10 Küat Racks Limited Lifetime Warranty Küat honors the warranty on all Küat brand products for original owners of the product. Warranty is not transferable. If a Küat rack that is covered by the terms of this warranty and is determined by Küat, to be defective, Küat will repair or replace the defective parts.
- Página 11 1.877.822.5828 info@kuatracks.com kuatracks.com kuatracks.com...