Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
USE THE FOOD CHOPPER
-
Place the non slip mat onto the work-surface, rib upside down.
-
Position the bowl onto the middle of the non slip mat.
-
Fit the Knife blade over the pin in the bowl.
-
Add your food..
-
Cut large pieced of food into 1-2 cm (1/2-3/4 in pieces).
-
Don't chop hard foods such as coffee beans, ice cubes, spices or
chocolate-you'll damage the blade.
Fit the splashguard. Make sure the slots in the splashguard fit
over the handles in the rim of the bowl.
-
The super chopper will not operate unless the splashguard in fitted
in the right position.
-
Fit the power unit.
-
The power unit will only fit correctly in two positions.
-
Plug in. press down on the power unit for short lengths of time to
produce a pulsing action-this will avoid over processing the
ingredients.
-
If the appliance is overloaded, remove some of the mixture and
continue processing in several batches.
-
Stop the appliance and scrape down if necessary.
-
Do not run the chopper continuously for longer than 10 seconds.
Leave to cool for 1 minute in between each 10 seconds operation.
-
After use. Unplug and dismantle.
CLEANING
Always switch off and unplug before cleaning.
Handle the cutting blade with care as they are extremely sharp.
Some food will discolor. It won't harm the plastic or affect the flavor of your
food.
Power unit and non slip mat
Wipe with a damp cloth, and then dry.
Other parts
Wash by hand, then dry the thoroughly.
Or wish on the top rack or your dishwasher.
-5-
Publicidad
Tabla de contenido
