Brushes; Changing The Brushes; Brush Cleaning; Entire Unit - Kerbl HAPPYCOW Uno Instrucciones De Uso

Figure 9 – Lubrication points

8.6 Brushes

The brushes (Fig. 12 - item 58 + item 59) must be changed once they have worn down and exhibit only inadequate cleaning performance on the
animals.

8.6.1 Changing the brushes

1. Unfasten the M10 screw (Fig. 12 - item 51) on the brush and remove the clamping plate (Fig. 12 - item 30)
2. Remove the brush blocks, cover discs and rubber discs (Fig. 12) and replace with new brushes
3. Assemble the parts in reverse order. Secure the M10 screw (Fig. 12 - item 51) with threadlocker.

8.6.2 Brush cleaning

We recommend cleaning the brush element at 6-weekly intervals with a suitable disinfectant
(e.g. #299698 INTERKOKASK

8.7 Entire unit

The entire unit must be cleaned on a regular basis.
Important!
• The gears, motor and electrical components must not be cleaned with water jets.
• Only clean the control unit with a damp sponge / cloth!

8.8 Disposal

Please observe local waste disposal regulations! Separate all of the unit's parts, auxiliary materials and operating materials according to type.
Consult your local authority if you have any questions concerning disposal options and quantities.
disinfectant from Albert Kerbl GmbH)
®
50
FINISHED SURFACE:
SCALE
$field4
ISO 5456-2 Projection
MATERIAL:
methode1
WEIGHT IN GRAMM
Albert KERBL GmbH Felizenzell 9 D-84428 Buchbach $mat
l l General tolerances
(WITHOUT FINISHED SURFACE):
Fon +49 (0)8086 - 933-100 Fax +49 (0)8086 - 933-500
l ISO 2768 - mK
$weight
Mail info@kerbl.com www.kerbl.com
l
$aei8 $aet8 DATE NAME
$aed8 $aeu8 TITLE:
$aei7 $aet7 DRAW $created_at $created_by
$aed7 $aeu7
$aei6 $aet6 CHECK $rel_at $rel_by
$aed6 $aeu6
$aei5 $aet5 NORM $norm_at $norm_by
$aed5 $aeu5
$aei4 $aet4 UNLESS OTHERWISE SPECIFIED:
$aed4 $aeu4
DIMENSIONS ARE IN MILLIMETERS
$aei3 $aet3 ARTICLE NUMBER PROJECT NUMBER
$aed3 $aeu3 DWG NO.
KERBL: KERBL:
$aei2 $aet2
$aeu2
$aed2
$field1 $field2
$aei1 $aet1
$aed1 $aeu1
DATE NAME Urspr. $source
STAT. REVISION NOTE
$
$ben1
$ben2
$ident
$repl