Description; Main Operations - G3 Ferrari CAFÈ DE LUX G10054 Manual Del Usuario

limits of the capacity indicated on the tank itself (MAX
level). Always pour the water before operating. Never
introduce liquids after switching on.
- During use, do not remove jug as to prevent dripping.
- Do not leave the empty carafe on the heating plate, if it
is running. Do not operate without water in the tank.
- Once finished, unplug the unit and drain the tank
completely. Once finished, remember to unplug the
appliance and wait for the cooling of each part of the
product before storing or cleaning.
- Do not immerse in water or other liquids. In any case,
avoid any splashing of water.
- Place on shelf and stable surface.
G10054 DESCRIPTION
1 Water tank lid
4 ON/OFF button
7 Water outlet
10 Glass jug
OPERATION
Before using the unit for the first time, fill the water tank up to the maximum level and operate without coffee
in the filter, until the water in the container is finished. Repeat 4-5 times.
COFFEE PREPARATION
- Open the tank lid (1) and put water in the tank (2). Do not fill above the maximum level (MAX) indicated
on the tank. Put the nylon filter (5) in the infusion funnel (6)
- By using the measuring cup, fill in the filter (5) with coffee powder or barley coffee. Each notch of water
situated on the tank (2) shows how many cups of coffee are necessary. Close the lid (1).
- Place the glass jug (10) above the heating plate (3), aligning the hole in the carafe cover with the coffee
outlet nozzle (8).
- Plug the unit into the electrical outlet and turn the power on by pressing the ON/OFF button (4). The red
light on the ON/OFF button lights up to indicate working.
- Wait until the carafe is full of coffee.
- At this point, the drink is ready in the jug (10) and the heating plate (3) keeps it warm.
- To switch off appliance, press again the ON/OFF button (4), otherwise i twill stay on for 40 minutes (only
for keep warm function) and then switch off automatically.
STRONG COFFEE, TEA AND INFUSIONS PREPARATION
WARNING: Before preparing tea or infusions properly clean the nylon filter to remove any coffee
residue. Follow this procedure to prepare tea, infusions and stronger coffee.
- Open the tank lid (1) and put MAXIMUM 400cc of water in the tank (2).
- Put the nylon filter (5) in the infusion funnel (6)
- By using the measuring cup, fill in the filter (5) with coffee powder or barley coffee or tea or infusions.
Each notch of water situated on the tank (2) shows how many spoons of coffee are necessary. Close the lid.
- DO NOT PUT THE GLASS JUG (10) above the heating plate (3). In this way the anti-drip outlet will
keep the liquid in infusion, avoiding the exit.
2 Water tank
5 Nylon filter
8 Outlet nozzle
11 Measuring spoon
3 Heating plate
6 Infusion funnel
9 Jug handle
12 Main body
10