Preparation; Operation Instructions - Pond Boss 52387 Manual Del Usuario

PREPARATION

Before beginning assembly or operation of product, make sure all parts are present.
Compare parts with package contents list and diagram. If any part is missing or
damaged, do not attempt to assemble, install or operate the product. Contact Customer
Care for replacement parts.
• Estimated Assembly Time: 20 minutes
• Tools required for assembly: Hacksaw

OPERATION INSTRUCTIONS

1 in. ID Tubing
1
Cut ring
For maximum water flow, it is recommended that
the largest tubing size for your pump is used. If
using 3/4 in. ID tubing, skip to step 2.
Step 1. If using 1 in. ID tubing, trim the tubing
adapter using a hacksaw at the location indicated.
2
Step 2. Place the tubing adapter on the lower
hole of the tank and use a gasket for it to be
sealed tightly when fastened.
Hand-tighten the locking ring on the inside the
tank to secure the tubing adapter in place.
PLEASE CALL CUSTOMER CARE BEFORE RETURNING ITEM TO STORE: 1-888-755-6750
3