Bremont U-2 Manual Del Usuario página 4

Changing The sTraP
RemovIng a stRap
Use the end of your watch tool to
carefully lever the spring bar out
of the lug.
FIttIng a stRap
Place one end of the spring bar
into the hole in the lug and use the
end of the watch tool to lever the
other end into position.
U-2/U-22
AUTOMATIC CHRONOMETER
Your Bremont watch shows you the time in hours, minutes and seconds,
and the day and date. The mechanical movement with automatic winding
has a free-swinging rotor that keeps the mainspring wound via the motion
of your wrist. The movement in your U-2/U-22 has 25 jewels, runs at
28,800 bph and has a 38-hour power reserve once fully wound. The watch
is water resistant to 100m (10ATM) and the dial is protected by a dual anti-
reflective sapphire crystal that is retained securely in the case.
To ensure that this rather special watch continues to run beautifully for
years to come you must follow a few important operating instructions...
winding The waTCh
Your U-2/U-22 can be wound from crown position I by rotating the crown
in a clockwise motion. The movement will automatically start with just a
few revolutions of the rotor, however it is better to wind the movement
fully with 30-40 revolutions of the crown. By doing this you will achieve
maximum accuracy and have a power reserve of 38-hours, even when the
watch is not on your wrist.