Kenwood KW 85 Instrucciones De Uso página 23

GB/KW85 17-11-2003
If the flange hose must be curved to expel the
air, you should follow the measurements given
in the figure:
50 cm
(19.7 in)
50 cm
(19.7 in)
Incorrect installation diagram (the bend in
the hose is excessive and could easily lead to
malfunction)
10
19:21 Pagina 10
I n s t a l l a t i o n
MOUNTING THE ADJUSTABLE WINDOW CLOSU-
RE CROSSPIECE (only on some models)
The appliance is provided with an adjustable
bracket.
If you have a sliding window, position the cros-
spiece in the window frame, extend it comple-
tely then close the window onto the crosspie-
ce. Fit the window flange onto the end of the
air exhaust hose, position it on the hole in the
crosspiece, then fit the other end of the hose
onto the back of the air conditioning unit.
This considerably reduces heat dispersion due
to contact between the room and the outside
environment.
The crosspiece is 40 mm (1.5") wide and
between 675 mm (26.7") and 1230 mm (48.4")
long.