Publicidad
Serial ATA3 Connectors
(SATA3_0:
see p.1, No. 11)
(SATA3_1:
see p.1, No. 10)
(SATA3_2:
see p.1, No. 13)
(SATA3_3:
see p.1, No. 12)
USB 2.0 Header
(9-pin USB_3_4)
(see p.1, No. 15)
USB 3.2 Gen1 Header
(19-pin USB3_3_4)
(see p.1, No. 9)
Front Panel Type C USB
3.2 Gen1 Header
(20-pin F_USB31_TC_1)
(see p.1, No. 8)
Front Panel Audio Header
(9-pin HD_AUDIO1)
MIC2_L
(see p.1, No. 18)
MIC2_R
Vbus
Vbus
Vbus
IntA_PB_SSRX-
IntA_PA_SSRX-
IntA_PB_SSRX+
IntA_PA_SSRX+
GND
GND
IntA_PB_SSTX-
IntA_PA_SSTX-
IntA_PB_SSTX+
IntA_PA_SSTX+
GND
GND
IntA_PB_D-
IntA_PA_D-
IntA_PB_D+
IntA_PA_D+
Dummy
1
USB Type-C Cable
1
GND
PRESENCE#
OUT2_R
MIC_RET
J_SENS E
OUT2_L
OUT_RET
These four SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
* If M2_1 is occupied by
a SATA-type M.2 device,
SATA3_0 will be disabled.
There is one USB2.0
header on this
motherboard. This USB
2.0 header can support
two ports.
There is one header on
this motherboard. This
USB 3.2 Gen1 header can
support two ports.
There is one Front
Panel Type C USB 3.2
Gen1 Header on this
motherboard. This header
is used for connecting a
USB 3.2 Gen1 module for
additional USB 3.2 Gen1
ports.
This header is for
connecting audio devices
to the front audio panel.
B660M-ITX/ac
21
Publicidad
