NORTH STATES 5446 Manual Del Usuario página 4

• To install wall cups, place the gate in the opening so that the
Step 3
bottom of the gate frame is completely at on the oor (Figure 3A).
• Fasten the mounting cups to the wall by aligning them with the
bolts. Use double coated tape or screws provided as shown in
Figure 3B.
IMPORTANT: Never install this gate without mounting cups!
3A
Gate
• To mount your gate, place the gate where you want to install it,
Step 4
then extend all 4 bolts until they reach the walls. Ensure that the
ends of the bolts are seated inside the mounting cups.
3B
Floor
Page 4