General Features; Description Of The Product - Faro ALYA Manual De Uso

2. GENERAL FEATURES

2.1

DESCRIPTION OF THE PRODUCT

The device is used by the user to light the operative field when treating dental pathologies.
The light source on the head is composed of two LED whose light reflects against two parabo-
las passing through two secondary lenses.
The parabolas enable a regular and uniform spotlight to be obtained at each lighting level and
to evenly distribute the light in the operative field, without creating shadows or obstruction by
the operator.
Adjustment of light intensity can be carried out with a joystick or proximity sensor. The pro-
ximity sensor switches on and off the light without having direct contact, thereby eliminating
the possibility of cross infection on the command.
The "automatic switch on" or "Auto-on" function allows the light to switch on automatically
each time the light power supply is activated.
The remote cable allows bringing the light commands to the combined unit Comply with the
instructions provided in the installation paragraph.
On the head near the joystick and/or the proximity sensor there is a button which allows
for activation of the synchronization function with the environment lamp produced by Faro.
The synchronization function allows the Alya lamp to control the level of illumination of the
environment lamp in order to guarantee a more uniform level of illumination between the
operating area and the surrounding zone, in order to reduce the effect of glare and to improve
comfort Visual.
In the version with light on the rear arm called "Alya with Theia Tech" the light source is
composed of a series of LED whose light passes through a diffuser for distribution in the en-
vironment below.
Adjustment of the lighting level takes place in synchronous mode with that of the head for
which on reducing or increasing lighting produced by the head, that on the arm also adjusts.
The "Theia Tech" light version also has a local command intended only to provide on/off on
the fixed arm.
Once the local command is switched on, the light automatically synchronises with the level of
head intensity. If the light on the head is switched off, the light on the rear arm switches on to
maximum intensity. On switching on the light on the head, the light on the arm will synchro-
nise automatically.
The light on the arm performs a visibility increase function in the pre-operative zone to reduce
glare that generates following and/or after viewing the operative field.]
Maintenance is facilitated thanks to application of the new technologies which take into con-
sideration the various needs for safety, ergonomics and hygiene.
The handles can be removed and sterilised. Comply with the specifications defined in the
specific section.
For the electrical connections, comply with the instructions supplied in the installation para-
graph and the wiring diagrams included in this manual
41