MAXI-MATIC Elite Cuisine ECT-3803 Manual De Instrucciones página 7

CARE AND
CLEANING
1. Be sure the toaster is unplugged from the electrical outlet and that it has completely cooled
before cleaning.
2. Wipe the toaster exterior with a clean, damp, soapy cloth. Do not use abrasive cleansers or
cleaning materials.
3. DRY THOROUGHLY BEFORE REASSEMBLING FOR USE OR FOR STORAGE.
CAUTION: NEVER IMMERSE THE TOASTER OR PLUG IN WATER OR ANY OTHER LIQUID.
TO REMOVE THE CRUMB TRAY:
NOTE: Toaster must be completely cool and not in operation or plugged into an electrical outlet
before cleaning or removing the crumb tray.
1. Hold the toaster in the upright position; pull the crumb tray out from the side opposite of the
toasting controls by sliding it out and away from the toaster bottom (Fig 1).
2. Empty the crumbs over a garbage can or sink as crumbs will fall upon release of the tray.
3. To replace crumb tray, slide back into toaster. A click will sound when the tray has locked into
place properly.
4. It is recommended to clean the crumb tray regularly.
REMOVING LODGED TOAST:
If a piece of toast becomes lodged in the toaster, unplug the toaster and allow it to cool. Turn the
toaster upside down, and shake whatever is stuck loose.
CAUTION: NEVER USE A FORK OR SHARP-EDGED UTENSIL TO REMOVE TOAST OR TRY TO REMOVE
ANYTHING THAT IS STUCK INSIDE THE TOASTER WHILE IT IS IN OPERATION OR PLUGGED IN. DOING
SO MAY DAMAGE THE HEATING ELEMENT AND CAUSE SEVERE PERSONAL INJURY.
www.maxi-matic.com
All manuals and user guides at all-guides.com
6
Figure 1
info@maxi-matic.com