ASSEMBLY INSTRUCTIONS
1. Insert the water supply tube preassembled to top
(A) into bottom (B), then carefully attach top (A) to
bottom (B). Attach pump (C) to water supply tube,
resting pump (C) inside bottom (B).
2. Ensure the power cord of pump (C) is out of the
item, then fill base (B) with clean water. Note: The
maximum water level should be approximately 30
mm below the top edge of base (B).
3. Finally, connect the plug of pump (C) to a
GFCI outlet.
1
A
2
B
3
Lowes.com/gardentreasures
5
B
C
C
C