Stanley FATMAX SFMCST933 Manual Del Usuario página 12

English
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Do not expose the tool to rain or high humidity
or leave outdoors while it is raining.
Switch the tool off. Before performing any
maintenance on the tool, remove the battery
from the tool.
Keep people and animals at least 6 m away
from the work area.
Keep bystanders away.
Directive 2000/14/EC guaranteed sound power.
96
Date Code Position (Fig. J)
The date code , which also includes the year of manufacture,
18
is printed into the housing.
Example:
2019 XX XX
Year of Manufacture
10
Description (Fig. A)

WARNING:
any part of it. Damage or personal injury could result.
On/Off trigger
1
Lock-off button
2
Speed control switch
3
Main handle
4
Auxiliary handle
5
Height-adjust collar
6
Turn-to-edge collar
7
Trimmer head
8
Intended Use
This Grass Trimmer is designed for professional
trimming applications.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
This is not an edger and is not intended to be used for edging.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
ASSEMBLY AND ADJUSTMENTS

WARNING:
personal injury, turn tool off and disconnect battery
pack before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.

WARNING:
battery packs and chargers.
Inserting and Removing the Battery Pack
from the Tool (Fig. F)
nOTE: Make sure your battery pack
To Install the Battery Pack into the Tool
1. Align the battery pack
13
(Fig. C).
2. Slide it into the tool until the battery pack is firmly seated
and ensure that you hear the lock snap into place.
To Remove the Battery Pack from the Tool
1. Press the release button
out of the tool handle (Fig. F).
Never modify the power tool or
Wire edge guide
9
Spool housing
10
Guard
11
Battery housing
12
Battery pack
13
Battery release button
14
Auxiliary handle
15
adjustment buttons
To reduce the risk of serious
Use only STANLEY FATMAX
is fully charged.
13
with the rails inside the tool
and firmly pull the battery pack
14