Duronic GHS37 Manual De Instrucciones página 11

NORMAL CYCLE: 14 hours on / 10 hours
off
Press this button and the system will be
switched on. It will sound a "beep" and run
in 'normal cycle' mode. This means the LED
light panel will light up for 14 hours. It will
then switch off for 10 hours. The following
day it will repeat this pattern: 14hrs on /
10hrs off.
SHORT CYCLE: 12 hours on / 12 hours off
If you press this button, the system will sound a "beep" and enter the
'short cycle' mode. The LED panel on the top will reduce the intensity of
the light and will start a cycle of 12 hours on / 12 hours off.
LONG CYCLE:
If you press this button, the system will sound a "beep" and enter 'long
cycle' mode. The LED panel on the top will increase the intensity of the
light and will start a cycle of 16 hours on / 8 hours off.
Setting the Mode
From the moment the system is connected and switched on at the plug, the
power button will luminate and the lamp will be in 'standby mode'.
When you select a mode, it will turn on the lamp and activate a 24-hour clock
to coincide with the cycle of the mode you have chosen. Depending on the
time you first selected the mode, this will be the same time that the light turns
on every day thereafter.
For instance, if you select the 'normal mode' at 10am for the first use, the
system will run the cycle of 14 hours lights on and then 10 hours lights off.
It will then automatically turn back on at 10am the following day, and the
cycle will continue for as long as desired until the unit is either turned off into
'standby mode' or switched off at the plug.
Using the Control Panel
16 hours on / 8 hours off
11