Beper P203PAN010 Manual De Instrucciones página 10

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 21
Panneau radiant halogène Manuel d'instructions
Do not place the appliance immediately below a wall socket-outlet.
Keep inflammable objects and materials (such as furniture, cushions,
blankets, paper, cloths, curtains, etc.) at least 1 meter away from the
appliance.
Do not leave the appliance operating unattended: make sure the ap-
pliance is off, and disconnect it from the wall socket.
Warning: the appliance is not equipped with a device to con-
trol the room temperature. Do not use the appliance in small
rooms, when they are occupied by persons not capable of
leaving the room on their own, unless constant supervision
is provided.
Product description Fig. A
1. ON/OFF switch
2. Heating elements switch keys
3. Swing function key
Mounting and operation
Remove the screws from the bottom of the appliance, and insert the base making sure it perfectly fits inside it.
Fasten the base to the appliance with the screws, and run the power cord through the dedicated slots found on
the base.
Place the appliance of a flat, dry and stable surface, and connect it to the wall socket.
Turn the appliance on by pressing the ON/OFF switch: the central heating element lights up, and the appliance
works at minimum power. It's possible to switch on/off the other heating elements by simply pressing the related
switch keys found on the control panel.
To activate swing function, press the function key; press it again to stop.
Note: the appliance is equipped with a tip-over switch, which cuts the power out in case of accidental
falling or when the base is lifted from the ground.
Cleaning and maintenance
The appliance does not require particular maintenance.
Before carrying out any cleaning operation, make sure that the appliance is off, unplugged from wall socket and
completely cooled off.
Clean the outer surface with a soft, slightly dampened cloth; dry thoroughly.
Warning: do not immerse the appliance in water or other liquids.
Technical data
Power: 1200W
Input: 220-240V~ 50/60Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
10

Publicidad

Tabla de contenido
loading

Tabla de contenido