Tabla de contenido
Publicidad
7. Do not overload the tool
He will do the tool do the work better and safer in the range indicated by the manufacturer;
8. Use the right tool
Do not try to force small tools or attachments to do the job of a great and powerful tool. Do not use tools
for specific activities (eg: Do not use a circular saw cuts on branches or trunks);
9. Work with correct operate the clothing
Do not wear loose clothing or jewelry, they can be caught in moving machine parts are. When grinding
outdoors is recommended to wear protective hair rubber gloves and shoes with stable tread. If you have
long hair, wear protective hair covering;
10. Use safety glasses
Furthermore, use breathing mask or if cuts is associated with release of suction;
11. Use dust collectors
If the equipment can be placed for extract and sabipane of suction, and assure their place ppavilno use;
12. Securing the workpiece
Use clamps or a vise to lock the workpiece, it is safer than if you are holding it by hand, but you can use
both hands on the saw for grinding tool;
13. Do not stretch to reach objects beyond your
the given tool may cause hazardous situation;
14. Giving the tool repaired only by a qualified person
This tool is towards the relevant rules of labor safety. Permitted repairs carried out only by a qualified
pepsonal using original spare parts, otherwise working for a significant risk of accident.
15. Preservation of the environment.
In view of environmental power, additional accessories and packaging must be subjected
to appropriate processing for reuse of the information contained in these materials.
Do not dispose of electric household waste! Under the EU Directive 2012/19/EC on waste
electrical and electronic devices and validation and as a national law power which can be
used more, must be collected separately and be subjected to appropriate processing for
recovery of contained they scrap.
SAFETY RULES FOR LASER DEVICE
Laser device used in the power tool design is the class 2 with maximum power below 1mW and wavelength
650 nm. Such device is not dangerous to your sight, however do not look directly at the source of the light
(temporary blindness hazard).
WARNING. Do not look directly at the source of laser beam. It may cause hazards. Follow the below safety
rules.
Use the laser device in accordance to the manufacturer's instructions.
Do not, either intentionally or unintentionally, point the laser beam at people, animals or any object other
than processed material.
Do not bring to accidental pointing the laser beam at bystanders' or animals' eyes for a period longer than
0.25 seconds, for instance by pointing the laser beam at mirrors.
Always ensure the laser beam is directed at material which does not have any reflective surfaces.
Reflective steel sheet does not allow for laser use, because it might cause hazardous light reflection
directed at operator, bystanders or animals.
Do not replace laser assembly with device of other type. Any repair should be conducted by the
manufacturer or authorized person.
17
Publicidad
Tabla de contenido
