Blaupunkt 5DD72555 Manual De Uso página 11

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 33
4. CONTROLS
L
Function
Key
Turns the lights on/off at maximum intensity.
L
If there is an induction cooktop coupled with the hood and the hood is off, as
soon as the induction cooktop is turned on, the hood lights automatically turn on
at the maximum intensity.
Delay Function
Activates/Deactivates the Delay function, the automatic delayed shut-down of the
motor and lighting system after 30 minutes.
Cannot be activated if the Intensive or Delay functions are active.
MULTICONTROL coupling
Long press when all loads are off (Motor+Light):
the procedure for associating the hood to compatible devices (induction cooktop
or remote control) is initiated. Up to 3 induction cooktops can be paired and only
one remote control. See the manual of the devices for details of the operations
that need to be performed on these.
The coupling procedure takes 2 minutes. If no devices are recognised within this
time check that you have previously activated the procedure for the devices to be
coupled. The maximum number of linkable devices may have been reached.
Turns the motor on/off at the first speed.
T1
Long press:
Activates/Deactivates the Activated Carbon Filters alarm.
Note: perform the operation with the lights on only (motor off).
MULTICONTROL decoupling
Long press when all loads are off (Motor+Light):
the procedure for deleting all compatible devices previously associated with the
MULTICONTROL coupling function initiates.
Turns the motor on/off at the second speed.
T2
24h Function
Activates/Deactivates the motor in the 24h mode, a speed that allows suction of
10 minutes every hour, for a 24-hour cycle.
Note: perform the operation with the lights on only (motor off).
Cannot be activated if the Intensive or Delay modes are active.
T1
T2
T3
T4
LED
-
The selected speed LED
flashes.
LEDs T1 and T2 flashing:
coupling in progress.
Upon successful completion
of the procedure LEDs T1
and T2 will light up for 2
seconds.
Fixed
All LEDs flash twice:
alarm activated.
All LEDs flash once:
alarm deactivated.
Upon successful completion
of the procedure LEDs T1
and T2 flash 5 times.
Fixed
Flashing
S1
11

Publicidad

Tabla de contenido
loading

Tabla de contenido