Publicidad
INPUT
FUNCTIONS
1
8-16
SPEAKER
OUTPUT
7
1. POWER SWITCH
This switch turns the amplifier on and off. When
the amplifier is switched on, allow a moment for
the tubes to warm up before playing. This will
8-16
increase the lifespan of the tubes and create a
better output sound.
2. STANDBY LIGHT
SPEAKER
OUTPUT
This light will illuminate when the amplifier is
switched on.
3. VOLUME CONTROL
Adjust this dial to control the overall output sound
from the amplifier. This dial will also affect the
volume sent to the speaker output connector on
the rear of the amplifier.
4. TONE CONTROL
Adjust the tone of your amplifier using this dial.
Fully anticlockwise will produce a thinner sound,
fully clockwise will produce a broader sound.
5. HIGH/LOW SWITCH
Switch between 1W (low) and 15W (high) power
output using this switch.
6. INPUT CONNECTOR
Connect your guitar to this connector using a
6.3mm TS jack cable.
5W
1W
TONE
STANDBY
VOLUME
2
3
3
STANDBY
VOLUME
TONE
5W
1W
4
5
INPUT POWER: 220-240VAC, 50-60Hz
MADE IN
POWER CONSUMPTION: 50W
CHINA
SERIAL NO.:
7. SPEAKER OUT CONNECTOR
Connect an external speaker to this connector
using a 6.3 TS speaker jack cable.
NOTE: This connection outputs at an amplifier level.
It is recommended to use a speaker jack cable
capable of carrying the required load.
INPUT POWER: 220-240VAC, 50-60Hz
MADE IN
POWER CONSUMPTION: 50W
CHINA
SERIAL NO.:
8. MAINS POWER CONNECTOR
Connect the amplifier to the mains power using
this connector. Only use the mains cable provided
with the product.
5V
INPUT
6
8
Publicidad
