Página 1
A SMALL AMOUNT OF PANEL FLEX IS COMMON IN WOOD PRODUCTS. LES BOIS DURS VÉRITABLES ET PLACAGES DE BOIS UTILISÉS DANS LE MOBILIER BELL'O SONT NATURELLEMENT BEAUX. CERTAINES VARIATIONS DANS LE GRAIN DU BOIS SONT NORMALES ET SOUHAITABLES. VEILLER À UTILISER EXCLUSIVEMENT UNE CIRE POUR MOBILIER EN BOIS DE HAUTE QUALITÉ POUR L'ENTRETIEN DE CE MEUBLE.
Página 2
FOR YOUR SAFETY, PLEASE FOLLOW THESE PRECAUTIONS: ! ALWAYS REMOVE THE TV AND OTHER EQUIPMENT FROM THE FURNITURE PRIOR TO MOVING THE ASSEMBLED UNIT. ! BE CAREFUL WHEN MOVING THE ASSEMBLED FURNITURE AFTER THE GLASS SHELF HAS BEEN INSTALLED, AND/OR WHEN THERE IS EQUIPMENT LOCATED ON THE FURNITURE AS THIS MAY CAUSE THE SHELVES AND OTHER ITEMS TO BECOME UNSECURED AND FALL.
Página 3
PARTS LIST / NOMENCLATURE DES PIÈCES / LISTA DE PIEZAS Quantity Quantity Part / Pièce / Pieza Quantité Part / Pièce / Pieza Quantité Cantidad Cantidad TOOL OUTIL HERRAMIENTA 35mm 18mm 15mm 42mm 50mm 34" 27"...
Página 4
STEP 1: STAND ASSEMBLY ÉTAPE 1 : ASSEMBLAGE DU MEUBLE PASO 1: ENSAMBLAJE DE LA BASE NOTE: 2 PEOPLE ARE RECOMMENDED TO ASSEMBLE THIS FURNITURE. THIS TABLE IS CONSTRUCTED WITH REAL WOOD VENEER. TO AVOID DAMAGE DURING ASSEMBLY, IT SHOULD BE ASSEMBLED ON A SOFT SURFACE. REMARQUE : IL EST CONSEILLÉ...
Página 5
Fig. 1-2 3. ATTACH the top shelf support bars (41) and (51) and the bottom shelf support bars (61) and (71) to the front frame (1) with 15mm bolts (17) as shown. NOTE: THE TWO TOP SHELF SUPPORT BARS HAVE EXTRA HOLES TOWARD THEIR REAR. 3.
Página 6
Fig. 1-3 4. ATTACH the shelf support bars (41, 51, 61, & 71) to the front of the CMS ® panel (28) using 15mm bolts (17) and 35mm bolts (15) as shown above. 5. MOVE the stand to the place it will occupy when fully assembled and in use. 6.
Página 7
ÉTAPE 2 : POSE DU TÉLÉVISEUR PASO 2: INSTALACIÓN DEL TELEVISOR CAUTION: CAREFULLY DETERMINE THE CORRECT MOUNTING PROCEDURE TO PREVENT DAMAGE TO YOUR TV AND/OR BELL'O ® MOUNTING SYSTEM. ALWAYS REMOVE THE TELEVISION & COMPONENTS BEFORE ATTEMPTING TO MOVE THE STAND.
Página 8
SELECT THE CORRECT ASSEMBLY PROCEDURE FOR YOUR TELEVISION. SÉLECTIONNER LA PROCÉDURE D'ASSEMBLAGE CORRECTE POUR LE TÉLÉVISEUR. ELIJA EL PROCEDIMIENTO DE ENSAMBLAJE ADECUADO PARA SU TELEVISOR. IF YOUR HOLE MOUNTING FOLLOW THE APPROPRIATE ASSEMBLY PROCEDURE: CONFIGURATION IS: 75 x 75mm ONLY THE MOUNTING BRACKETS (11 OR 12) ARE REQUIRED 200 x 200mm 100 x 100mm 400 x 200mm...
Página 9
MOUNTING THE TV WITH MOUNTING BRACKETS ONLY POSE DU TÉLÉVISEUR AVEC LES SUPPORTS DE FIXATION SEULEMENT INSTALACIÓN DEL TV SÓLO CON LOS SOPORTES DE INSTALACIÓN THE MOUNTING BRACKETS (11 OR 12) ALONE CAN ACCOMMODATE MOST TELEVISION MOUNTING CONFIGURATIONS. FOR TV'S WITH A 300mm WIDE CONFIGURATION, REFER TO PAGE 9. FOR TV'S WITH A MOUNTING CONFIGURATION TALLER THAN 400mm, REFER TO PAGES 10 &...
Página 10
MOUNTING THE TV WITH MOUNTING BRACKETS AND 300MM ADAPTERS POSE DU TÉLÉVISEUR AVEC LES SUPPORTS DE FIXATION ET LES ADAPTATEURS DE 300MM INSTALACIÓN DEL TV CON SOPORTES DE INSTALACIÓN Y ADAPTADORES DE 300MM USE ADAPTERS (22) FOR TELEVISIONS WITH A 300mm WIDE MOUNTING CONFIGURATION ONLY. DO NOT EXCEED 125 LBS. UTILISER LES ADAPTATEURS (22) SUR LES TÉLÉVISEURS À...
Página 11
MOUNTING THE TV WITH MOUNTING BRACKETS & UNIVERSAL FLAT PANEL BARS POSE DU TÉLÉVISEUR AVEC LES SUPPORTS DE FIXATION ET LES BARRES POUR ÉCRAN PLAT UNIVERSELLES INSTALACIÓN DEL TV CON SOPORTES DE INSTALACIÓN Y BARRAS UNIVERSALES PARA PANTALLA PLANA ONLY USE UNIVERSAL FLAT PANEL BARS (14) WITH THE MOUNTING BRACKETS (11 OR 12) FOR TELEVISIONS WITH A MOUNTING CONFIGURATION TALLER THAN 300mm.
Página 12
MOUNTING THE TV WITH MOUNTING BRACKETS AND UNIVERSAL FLAT PANEL BARS (CONTINUED) POSE DU TÉLÉVISEUR AVEC LES SUPPORTS DE FIXATION ET LES BARRES POUR ÉCRAN PLAT UNIVERSELLES (SUITE) MOUNTING THE TV WITH MOUNTING BRACKETS AND UNIVERSAL FLAT PANEL BARS (CONTINUED) 3.
Página 13
STEP 3: INSTALL THE GLASS SHELVES ÉTAPE 3 : POSE DES PLATEAUX EN VERRE PASO 3: INSTALACIÓN DE LOS ESTANTES DE VIDRIO CAUTION: ALWAYS REMOVE THE GLASS SHELVES BEFORE ATTACHING/REMOVING YOUR TELEVISION, OR BEFORE ATTEMPTING TO MOVE THE STAND. ATTENTION : VEILLER À TOUJOURS ENLEVER LES PLATEAUX EN VERRE AVANT D'ACCROCHER/DÉCROCHER LE TÉLÉVISEUR OU DE TENTER DE DÉPLACER LE MEUBLE. ADVERTENCIA:SIEMPRE DEBE SACAR LOS ESTANTES DE VIDRIO ANTES DE COLOCAR O SACAR SU TELEVISOR O ANTES DE INTENTAR MOVER LA BASE.
Página 14
Fig. 3-2 4. INSERT the two CMS (Cable Management System) covers (13) into the vertical slots located in the rear of the Flat ® Panel Mounting System Post (2). You can easily manage and hide the unsightly wires and cables of the TV and other A/V components by removing these covers, running the cables, then re-attaching the covers.
Página 15
This warranty gives you specific legal rights. You may also have other rights, which vary from state to state. BELL'O INTERNATIONAL CORPORATION, 711 Ginesi Drive, Morganville, NJ 07751-1235 Phone: (732) 972-1333 Fax: (732) 536-6482 Web: www.bello.com E-mail: sales@bello.com...
“Defectos”, como aparece en esta garantía, se define como cualquier imperfección que imposibilita el uso del mueble o del producto. Nuestra garantía está expresamente limitada a la reposición de piezas y componentes del soporte para TV. Durante un (1) año a partir de la fecha de la compra, Bell'O In- ternational Corporation repondrá...