ASROCK Fatal1ty B360 Gaming K4 Serie Manual De Instrucciones página 31

2.8 M.2_SSD (NGFF) Module Installation Guide (M2_1
and M2_2)
The M.2, also known as the Next Generation Form Factor (NGFF), is a small size and
versatile card edge connector that aims to replace mPCIe and mSATA. The Ultra M.2
Socket (M2_1) supports SATA3 6.0 Gb/s module and M.2 PCI Express module up to Gen3
x4 (32 Gb/s). The M.2 Socket (M2_2) supports M Key type 2230/2242/2260/2280 M.2
SATA3 6.0 Gb/s module and M.2 PCI Express module up to Gen3 x2 (16 Gb/s)**
* If M2_1 is occupied by a SATA-type M.2 device, SATA_2 will be disabled.
* If M2_2 is occupied by a SATA-type M.2 device, SATA_1 will be disabled.
* If M2_2 is occupied by a PCIE-type M.2 device, SATA_0 will be disabled.
Installing the M.2_SSD (NGFF) Module
The following is an example of installing M.2_SSD (NGFF) module into the M2_1.
E D C
No.
Nut Location
PCB Length
Module Type Type2230
5
4
3
2
1
A
B
1 2
A B
3cm 4.2cm
Type 2242
Fatal1ty B360 Gaming K4 Series
Step 1
Prepare a M.2_SSD (NGFF) module
and the screw.
Step 2
Depending on the PCB type and
length of your M.2_SSD (NGFF)
module, find the corresponding nut
location to be used.
3 4
C D
6cm 8cm
Type2260 Type 2280
5
E
11cm
Type 22110
27