Choosing A Connection - Samsung DVD-P450 Manual De Instrucciones

C h a p t e r 2
C

Choosing a Connection

The following shows examples of connections commonly used to connect the DVD player wit
and other components.
Before Connecting the DVD Player
- Always turn off the DVD player, TV, and other components before you connect or disconne
cables.
- Refer to the user's manual of the additional components (such as a TV) you are connecting
more information on those particular components.
Connection to a TV (Video)
1
Using video/audio cables, connect the VIDEO (yellow)/AUDIO
(red and white) OUT terminals on the rear of the DVD player to
the VIDEO (yellow)/AUDIO (red and white) IN terminals of
your TV.
2
Turn on the DVD player and TV.
3
Press the input selector on your TV remote control until the
Video signal from the DVD player appears on the TV screen.
Note
- Noise may be generated if the audio cable placed too close to the power cable.
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 15 to
- The number and position of terminals may vary depending on your TV set. Please refer to the user's
of your TV.
- If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of th
player.
O N N E C T I O N S
ENG-11
YELLOW
RED WHITE
Audio
Video
Cable
Cable
WHITE
RED YELLOW