Intended Use - BAUKER CEH180HF Manual Del Usuario

This tool was designed to drill by impact concrete and stone and to drill wood, metal,
plastic and similar materials. Any other use is considered an improper use.
¡CAUTION! This packaging contains sharp objects. Be careful when opening. Remove
the tool and the included accessories from the packaging. Carefully check the contents
to make sure the machine is in good condition and has all the accessories listed in this
manual.
Also, make sure that all the accessories are included. If any part is missing, return the
machine and accessories in their original packaging to the retailer.
Do not discard the packaging, save it during the warranty period and then recycle it if
possible or dispose of it properly. Do not let children play with empty plastic bags due to
the risk of suffocation.
Para exibir o nível de carga restante na bateria, pressione o botão de nível de carga.
73

Intended Use

Unpacking
Nível de Carga
Indicator of the
Remaining charge
energy level
0 % - 10 %
10 % - 25 %
25 % - 50 %
50 % - 75 %
75 % - 100 %
The battery (A) of this tool is made of lithium ions and operates at 18 V of DC. It has
secure connection terminals (B), which means that when it is mounted on the tool,
and on the charger, it does not come loose, slip or disconnect.
To remove it, both from the tool and the charger, press the unlock button (C).
To allow the user to monitor the remaining charge level, press the button (E) that turns
on the charge level LED lights (D). One light on indicates that it remains until
approximately ¼ of charge. All lights on indicate that it is fully charged. See the table.
The battery also has an smart electronic circuit that disconnects it from the tool when
it is in bad conditions or is very hot, as a protection measure.
A. Li-Ion battery of 18 V
B. Connection terminals
C. Unlock button
D. Indicator lights for charge level
E. Charge level button
The charger is a base on which the battery is mounted. It is compatible only with the battery
model shown above. It is connected by a plug with a power cord to the mains. It has two led
lights that indicate the state of the battery charge.
The charger has a smart electronic system that protects the battery from overloads,
stopping the charging
process when the battery
has reached its maximum
charge. The charge is also
interrupted when the
battery is very hot or in poor
working condition.
General safety rules
Battery
Carregador
74