5
PTT button A
8
Scan button A
9
Up button A
Monitor button A
q
Down button A
q
Lock button A
3
Display A
6
Lamp button A
Micro USB port A
2.5 mm audio port A
Press to send a call tone. The tone will be
transmitted over the set channel.
Press and hold to talk.
Press to scan for radio channels.
Press to increase the volume.
Press and hold for 3 seconds to activate the
9
monitor.
Press to decrease the volume.
Press and hold for 3 seconds to lock or unlock
the product.
Press A
display light.
Press and hold to switch on the lamp.
The product can be charged in the charging
r
base or via the Micro-USB port on the side of
the product.
It is recommended to switch off your radio
during charging.
1. Plug the micro USB cable A
USB port A
2. Plug the other end of A
or power adapter.
3. Plug the power adapter into a power outlet.
4. Place the walkie talkies in the charging slots
A
The battery icon on the display flashes to
indicate the product is being charged.
Plug walkie talkie headphones (not included)
t
into the 2.5 mm audio port.
If you use the PTT button of the headphones,
also use the microphone of the headphone.
Do not connect other headphones to prevent
damage to the product.
Extended exposure to high volumes from
headphones can cause hearing loss.
7
8
9
A
A
or A
r
.
e
.
7
q
to switch on the
a
into the micro
a
into a computer