Publicidad
PARTS AND FUNCTIONS
1
2
3
4
5
6
7
8
9
1. Signal/Clip Indicator
Displays the input signal status in color.
Green: Signal present
Red: Signal clipping
Note: Reduce the corresponding volume control
to prevent signal clipping.
2. Volume Control
Adjust the volume of your microphone,
instrument or audio source.
3. Treble Control
Adjust the high-frequency balance of your
microphone or instrument.
4. Bluetooth Pair Button
Used to set up pairing with Bluetooth-capable
devices, such as mobile phones, tablets and
laptops. To pair your Bluetooth enabled device
with this product, press the Bluetooth button
to the 'On' position, search for and connect to
'SZS-MP6A' and follow the instructions on your
device.
Note: Channel 1 cannot be used with the Aux
input and Bluetooth simultaneously.
5. Bass Control
Adjust the low-frequency balance of your
microphone or instrument.
6. Reverb Control
Adjust the amount of reverb applied to your
microphone or instrument.
7. AUX Input
Connect a media device such as a CD player or
laptop using a stereo RCA/phono cable.
8. Line Output
Use a ¼" TRS cable to connect the line-level
output to the Channel 1 or 2 input of a second
SZS-MP6A to create a mono, two-loudspeaker
setup.
Note: Line Out is post mix.
9. Channel Input
Analogue input for connecting microphone
(XLR) and instrument (TS unbalanced) cables.
10. Power On/Off
Turns the power on or off.
11. Line/Mic Switch
Off: The input is turned off and will not accept
an audio signal.
Line (guitar symbol): Select this setting if
connecting an instrument such as a guitar or
keyboard.
Mic (microphone symbol): select this setting if
connecting a dynamic microphone.
5
10
11
12
13
14
Publicidad
