Datamars Unigizer 1 J МкII Manual Del Usuario página 70

Installing the energizer outside
The energizer may be installed outside,
powered by a battery.
WARNING!
USA/Canada - Refer to
Important safety instructions for Class 2
power units (USA/Canada only)
countries - Do not power the energizer with
mains/line power if it is being installed
outdoors.
To install the energizer outside:
1 Select a suitable installation site. See
Selecting a site for the installation
69.
2 Hang the energizer on a fence wire or
mount the energizer on a post. Use the
template printed on the back cover of this
manual, if required.
3 Connect the Fence earth terminal (green)
to the earthing system.
70
. All other
on page
4 Connect the Fence output terminal (red) to
the fence.
5 Connect the energizer to the battery using
the battery leads. Attach the + (red) clip
to the positive terminal of the battery, and
the – (black) clip to its negative terminal.
Note:
This energizer may be used as part of a
solar installation by connecting it to a battery
and solar panel(s). For information about solar
installations, refer to the product's website (see
packaging for details).