Installation - Indel Webasto Marine Isotherm FR115EL Instrucciones Para La Instalación Y El Uso

User Manual

4.1 Installation

Isotherm refrigerators have been designed and constructed exclusively for recessed
installation and installation that is in compliance with standard dimensions. The
refrigerator must always be in a horizontal position, with the compressor's rubber
feet at the bottom. The compressor is capable of functioning at angles of up to 30°.
The compressor can become damaged with any higher inclinations.
Also remote operation compressors must be installed with its rubber feet downward.
Elegance models can be fixed to the lodgings by means of the Easy Fix system. This
system involves four special pre-drilled points inside a trunk, for easy and effective
installation that is not visible from the outside (Fig. 8).
With Easy Fix, you can install units with the door flush to the furniture without using
a special mounting flange. For this installation, you must leave 10 mm of space
between the refrigerator and the furniture unit at least for the entire thickness of the
door, thus ensuring its free movement (Fig. 6).
Always secure the refrigerator in such a way so that it will not tip/slide forward when
the drawer is opened or in the case of sudden vehicle movement. The unit should be
anchored by at least 2 fastening points, in accordance with the provisions of the EN
60335-2-24 standard.
47