Publicidad
INTRODUCTION
Thank you for purchasing the Gear4music 12w UV Mini Flat Par Can by Gear4music. To help you get the most
out of your new equipment, please read this manual carefully.
BASIC FUNCTIONS
LED DISPLAY
BUTTONS
This product can operate as a standalone light or as a slave connected to another light, or as part of a DMX
network. Standalone operation includes a manual mode where you can set the static red, green, blue & white
levels, as well as jump, fade, strobe and sound-activated modes.
This product comprises 12 powerful UV LEDs divided into four groups. This allows varying patterns of UV light
to be produced, depending on which LEDs are lit. The four groups are arranged as shown below:
MENU SEQUENCE
Each time you press the MENU button you will move to the next item in the table below. Use the UP/DOWN
buttons to adjust the value. Auto modes A03, A04 & A05 have two adjustable parameters: Each time you press
the ENTER button the display alternates between the two parameters. The first parameter selects the function
and has a range from 1 to 19. The second parameter depends on the specific Auto mode. See the table below
for details. The first parameter is shown with static digits and the second parameter is shown with flashing digits.
Mode
DMX Selection
Master/Slave Mode
Static output
LED Jump Mode
LED fade Function
Sound Activation Mode
1
3
2
4
3
4
4
1
2
Menu
d001-d512
IP.01-IP.64
A1.01-A1.18
A2.01-A2.32 (flashing)
A3.01-A3.19
A3.01-A3.32 (flashing)
A4.01-A4.19
2
1
3
Press Up and Down to
Change the starting DMX channel for this light
Set IP value to 01 for slave operation. The remaining
values are not used.
Select between the 18 static output patterns
Cycles between all output patterns. Select the auto
program speed from 1 to 32.
Selects the fade function from to 19. Each of the 19
options represents a different sequence of output
patterns
Selects the function speed from 1 to 32.
Selects sound activation program. The value from 1 to
19 is not relevant.
Publicidad
