LG 55EC9300 Manual Del Proprietário página 17

Wall mount bracket (optional)
OSW100
LSW420BX
Removing a stand
(For 55EC9300)
1
Hanger
2
CAUTION
When laying the TV on its back on a padded table or
y
surface, be careful to prevent the TV from being damaged.
3
NOTE
For more information about mounting on a wall, refer to the
y
OSW100 manual.
When mounting the TV on a table, attach the stand by
y
performing the stand removal in reverse.
CAUTION
(When attaching the stand)
Make sure that the screws are fastened tightly. (If they
y
are not fastened securely enough, the TV may tilt forward
after being installed.)
Do not tighten the screws with too much force; otherwise
y
they may be damaged and come loose later.
Screw for attaching
the hanger
ASSEMBLING AND PREPARING
CAUTION
Disconnect the power first, and then move or install the
y
TV. Otherwise electric shock may occur.
If you install the TV on a ceiling or slanted wall, it may fall
y
and result in severe injury.
Use an authorized LG wall mount and contact the local
dealer or qualified personnel.
Do not over tighten the screws as this may cause damage
y
to the TV and void your warranty.
Use the screws and wall mounts that meet the VESA
y
standard. Any damages or injuries by misuse or using an
improper accessory are not covered by the warranty.
You will need at least two people to remove the stand and
y
one more to separate the stand from the TV so it doesn't fall
when the screws are removed.
NOTE
Use the screws that are listed on the VESA standard screw
y
specifications.
The wall mount kit includes an installation manual and
y
necessary parts.
The wall mount bracket is optional. You can obtain additional
y
accessories from your local dealer.
The length of screws may differ depending upon the wall
y
mount. Make sure to use the proper length.
For more information, refer to the manual supplied with the
y
wall mount.
When removing a stand, lay the TV on its back on a padded
y
table or surface. Do not put the TV face (front) down on the
table.
17