Biamp Vocia POTS-1 Manual Del Operador página 4

Front Panel Information
The POTS-1 LEDs are as follows (from left to right when viewing the front of the chassis):
1. 24V DC power 1
2. 24V DC power 2
3. Fault
4. Activity
5. Status
6. Line 1 Line Status
7. Line 1 Hook Status
8. Line 2 Line Status
9. Line 2 Hook Status
10. Line 3 Line Status (functional for POTS-1-4 model only)
11. Line 3 Hook Status (functional for POTS-1-4 model only)
12. Line 4 Line Status (functional for POTS-1-4 model only)
13. Line 4 Hook Status (functional for POTS-1-4 model only)
Power (Chassis Indicator)
The POTS-1 has two power indicators. If power is applied to one or both 24V DC power connectors, the
corresponding LED will be on.

Off – The power connection is not available or not within the voltage range.

Solid green – The unit is receiving power.
Fault (Chassis Indicator)
There are two types of chassis Faults that will be reported depending on the severity of the problem.
Audio may still be passing, but if the condition causing the warning is not corrected, a failure may occur.

Flashing amber – A warning has occurred, meaning some aspect of the unit is not performing
within normal specification.

Solid amber – A Fault has occurred, meaning some aspect of the unit has failed and audio may not
be passing.
Activity (Chassis Indicator)
The POTS-1 has an activity LED that will illuminate to show the configuration status of the unit.

Off – The unit is not configured.

Solid green – The unit is configured.
Status (Chassis Indicator)
The POTS-1 has a tri-color Status LED that indicates the health of the hardware.

Solid green – The unit is powered up and working normally.

Flashing amber – Shown during the power-up self-test.

Solid red – The unit experienced a problem during the power-up self-test.
Line Status

Solid green – Indicates no line fault - loop current and voltage is normal.

Solid amber – Indicates over-voltage and/or under-current line faults.
POTS-1 Front