Handling Precautions - Grohe Sensia ARENA 39354SH0 Guia De Inicio Rapido

Handling Precautions

Do not expose the toilet to direct
sunlight. It can cause discoloration of
the plastic parts. Direct sunlight can
furthermore lead to the remote
control and the sensor not working properly.
Do not open and close the toilet seat
or lid roughly. It may cause
malfunction of auto open/close,
cracking or electrical leakage.
Do not pour water or cleaning
agents onto the remote control. It
could cause it to malfunction.
Do not use electrical heaters in the
vicinity of the toilet. It could cause
discoloration of the plastic parts or
malfunctions.
Do not use any paper other than
toilet paper. Be careful not to drop
any foreign materials in the bowl, as
they may clog the drain pipe. If you drop,
pick it up before flushing.
If the toilet should become clogged,
use a plunger to remove the
clogging. Do not flush the toilet and
do not fill water into it by other
means (e.g. with a bucket) until the clogging
is removed. Waste water spilling over
constitutes a risk of electric shock and
damages to the device (electronic
components inside the toilet seat can get
damaged).
Do not operate the remote control with wet
hands. It could cause it to malfunction.
The device must not be used at installation
sites that are not stationary (e.g. on ships).
Never use steam cleaners to clean the
device.
The steam of a steam cleaner could come
into contact with energized parts and cause
a short.
The Shower Toilet must not be operated on
stand-alone inverters, such as those found
in autonomous power supplies e.g. in solar
systems. In such systems, switching on the
device can cause power spikes that may
cause safety shutdowns. This can damage
the electronic components!
14
GB
The Shower Toilet also must not be used on
so-called energy saver sockets, as they
reduce the power supplied to the device
which may in turn lead to the device
warming up.
Attention - Suffocation Hazard!
Children can suffocate when they play with
packaging materials (e.g. foil) and wrap
themselves into the materials or pull them
over their heads. Keep packaging materials
away from children.
The line specifications are printed on the
nameplate.
They must match the specifications of the
power grid.
When contacting the Grohe Service
department, always state the following:
– Model name
– Serial number
– Power supply information (network
voltage/frequency/maximum line
specifications).
Declaration of conformity
You can obtain the declaration of conformity
from your respective Grohe distributor.
Notification of changes
This user manual corresponds to the current
technical design of the device at the time of
print.
We reserve the right to introduce changes
to meet technical developments.