Operating Instructions - Kobalt SGY-AIR222 Manual De Instrucciones

ASSEMBLY INSTRUCTIONS
6. Connect air supply hose to the male plug.
Set the working pressure at 90 PSI for
best tool performance (See Figure 6).
NOTE
Working pressure refers to the air
pressure that is required coming from the
air regulator to operate the tool at 90 PSI
when running.

OPERATING INSTRUCTIONS

1. Push the forward/reverse lever (E) up or
down to select the desired direction.
("F" is for Forward, "R" is for Reverse).
Press the trigger (D) to start the drill.
(See Figure 1 and Figure 2).
6
1
2
D
E
12
D
E