Plug & Play - Samsung 6 Serie Guia De Inicio Rapido

Plug & Play
When the TV is initially powered on, basic settings proceed automatically and
subsequently.
Preset: Connecting the mains and antenna.
N
1. Press the POWERP button on the remote control.
You can also use the POWERP button on the TV.
N
The message Select Language of the OSD. is displayed.
N
2. Press the ENTERE button. Press the ▲ or ▼ button to select the language, then
press the ENTERE button. The message Select 'Home Use' when installing this
TV in your home. is displayed.
3. Press the ◄ or ► button to select Store Demo or Home Use, then press the
ENTERE button. The message Select the Antenna source to memorize. is
displayed.
We recommend setting the TV to Home Use mode for the best picture in your
N
home environment.
Store Demo mode is only intended for use in retail environments.
N
If the unit is accidentally set to Store Demo mode and you want to return to
N
Home Use (Standard): Press the volume button on the TV. When the volume
OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
4. Press the ▲ or ▼ button to memorize the channels of the selected connection. Press the ENTERE button to select Start.
Air: Air antenna signal. / Cable: Cable antenna signal. / Auto: Air and Cable antenna signals.
N
In Cable mode, you can select the correct signal source among STD, HRC, and IRC by pressing the ▲, ▼, ◄ or ► button,
N
then press the ENTERE button. If you have Digital cable, select the cable system signal source for both Analog and
Digital. Contact your local cable company to identify the type of cable system that exists in your particular area.
5. Press the ENTERE button to select Start. The TV will begin memorizing all of the available channels.
To stop the search before it has fi nished, press the ENTERE button with Stop selected.
N
After all the available channels are stored, it starts to remove scrambled channels. The Auto program menu then reappears.
N
Press the ENTERE button when channel memorization is complete. The message Set the Clock Mode. is displayed.
6. Press the ENTERE button. Press the ▲ or ▼ button to select Auto, then Press the ENTERE button. The message Set to
daylight saving time. is displayed. If you select Manual, Set current date and time. is displayed.
7. Press the ▲ or ▼ button to select Off, On or Auto, then press the ENTERE button.
8. Press the ▲ or ▼ button to highlight the time zone for your local area. Press the ENTERE button. If you have received a
digital signal, the time will be set automatically. If not, refer to the 'Setting the Time' instructions to set the clock.
9. The description for the connection method providing the best HD screen quality is displayed. Check the description and press
the ENTERE button.
10. The message Enjoy your TV. is displayed. When you have fi nished, press the ENTERE button.
If you want to reset this feature...
❑
1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTERE button.
3. Press the ENTERE button again to select Plug & Play.
The Plug & Play feature is only available in the TV mode.
N
All manuals and user guides at all-guides.com
English - 4
Plug & Play
Select Language of the OSD.
Menu Language : English ▶
E Enter