PEERLESS FPZ-655 Manual Del Usuario página 7

Position glass shelf (W) on top of shelf support (I) and under shelf clamp bracket (C) as shown below.
5
Secure glass shelf (W) in place by tightening two pre-installed 1/4-20 x 20 mm decorative screws (K)
as shown in detail 3.
Attach top cover (F) to adapter support plate (Q) with two M5 x 10 mm socket pin screws (V) as shown in figure 6.1.
6
Attach bottom cover (G) to clamp bracket (D) with two M5 x 10 mm socket pin screws (V) as shown in figure 6.2.
Tighten using 4 mm allen wrench (X).
V
FIGURE 6.1
K
W
F
D
7 of 33
C
DETAIL 3
G
FIGURE 6.2
V
ISSUED: 1-25-11 SHEET #: 125-9149-4 08-08-11
I