Humidity Sensing Fan Operation - Utilitech 7131-02 Manual De Instrucciones

EXISTING CONSTRUCTION ASSEMBLY INSTRUCTIONS
9. Pinch mounting springs (9.1) on grille (B) and
insert into narrow rectangular slots (9.2) inside
the fan (A). Push grille (B) up toward ceiling.
Turn on electricity at breaker box after finishing
installation.
HUMIDITY SENSING OPERATION
1. Humidity Sensing Mode:
Flip the wall on/off switch to the "ON" position. The
LED indicator light in the fan is BLUE. The fan will
automatically run when the humidity level in the
room is above 60%. If the humidity level is below
60%, the fan will stop automatically.
2. Full Speed Mode:
Cycle the wall on/off switch to the "OFF" position, then
back to the "ON" position. The LED indicator light
in the fan is AMBER. The fan will run continuously,
regardless of humidity level.
Blue
LED
Light
Amber
LED
Light
9
9.1
8.1
B
8.2
1
2
11
9.2
8.3
A
9.1
8.1