Publicidad
Model Number 60505
Assembly Instructions
Carefully unpack all parts and identify them with parts list before
attempting to assemble the chair.
IMPORTANT: DO NOT TIGHTEN BOLTS AND SCREWS FULLY UNTIL
YOU HAVE COMPLETED THE FINAL ASSEMBLY.
1. Put 5 CASTERS (A) into the holes on 5 STAR BASE (B).
2. Insert GAS LIFT (C) into the center hole top of 5 STAR BASE (B).
3. Insert BELLOW (D) over GAS LIFT (C).
4. Attach BACK CUSHION (H) to SEAT CUSHION (F) by positioning
BACK SUPPORT PLATE (K) with 4 SCREWS (E).
5. Attach both the left and the right ARMRESTS (G) to BACK CUSHION
(H) and SEAT CUSHION (F) by using 4 SCREWS (I) and 4 CAPS (J).
6. Insert the pre-assembled seat unit onto the gas lift to finish the
assembly.
7. Be sure that all the screws are fully tightened before using.
Description
A. CASTERS
B. 5 STAR BASE
C. GAS LIFT
D. BELLOW
E. SCREWS (1/4" X 1")
F. SEAT CUSHION
G. ARMRESTS (L&R)
H. BACK CUSHION
I.
SCREWS (M 8 X 50MM)
J. CAPS
K. BACK SUPPORT PLATE
L. ALLEN KEY
Parts List
Quantity
5
1
1
1
4
1
2
1
4
4
1
2
Publicidad
