Metra 95-8905B Instrucciones De Instalación página 3

ISO DDIN radio provision
1. Attach the radio brackets to the
radio trim panel. (Figure A)
2. Attach the radio to the completed
assembly using screws supplied
with the radio. (Figure B)
3. Locate the factory wiring harness
and antenna connector in the
dash, and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS. Re-connect the negative
battery terminal and test the radio
for proper operation.
4. Reassemble the dash in reverse
order of disassembly.
Kit Assembly
(Figure A)
95-8905B
(Figure B)
3