Publicidad
PTC Ceramic Heater
User Manual
TMFH020
PART FIGURE
Front
Air outlet iron grille
LED light
Tip over switch
Back
OPERATING INSTRUCTION
1. Plug into 220-240V~, 50-60Hz.
2. Place the heater on the floor at least 1 meter away from the wall
and any other objects such as furniture, drapes, or plants.
IMPORTANT SAFETY INFORMATION
PLEASE READ AND SAVE THESE INSTRUCTIONS
When using any electrical appliance, basic safety precautions should
always be followed, incg the following:
1. To ensure familiarity with the controls, safety features, and
operation of your product, please read all instructions before using.
2. Do not insert foreign objects through the intake or discharge
grilles.
3. This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a
safe way and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance shall not be
made by children without supervision.
4. Disconnect the cord from the outlet before cleaning. A heater
should never be used under conditions where it may be immersed,
or come in contact with water. Similarly do not plug in your heater if
its surfaces are damp.
5. Do not use the appliance on the same socket or electric circuit
with other electrical appliances so as to prevent the circuit from
being overloaded, which will cause fire. Please do not prolong the
power cords by yourself or use movable socket.
6. Unplug heater by grasping plug and pulling it from the outlet.
NEVER YANK ON CORD.
7. If the supply cord is damaged, it must be replaced by its service
agent or a similar qualify person in order to avoid hazard.
8. Do not use in locations when the heater will be left unattended
for long periods of time. (for example -several weeks in an
unoccupied summer cottage).
9. Do not use attachments not recommended and sold by distributor.
10. Loose connections between the heater plug and the electrical
outlet may cause the plug to overheat.
Operation Method
After plugged in, the knob is in "0" position, the unit is under power off
status and indicator lamp is off.
Power On: Rotate the knob clockwise to "
under normal wind mode and the indicator lamp is on;
Continue rotate the knob clockwise to "I" position, the unit works
under low power heating mode and the indicator lamp is on.
Upper housing
Continue rotate the knob clockwise to "II" position, the unit works
Knob
under high power heating mode and the indicator lamp is on.
Tip-over protection
Lower housing
When the unit is under power on status, if it detects tip-over
protection, the unit would come into standby status, if it detects the
Rotating base
unit out of tip-over protection, the unit will recover to work status.
Over-heating protection
When the using environment is abnormal or improper using which
leads to the internal temperature too high, the thermostat would cut
off the power automatically, after the internal temperature drop to a
certain degree, it will come back to work again.
Shaking head adjustment
The body of the product can be adjusted left and right, press the
Air Inlet
rotating button on the back side of the machine (as shown on the
right). The product body can be adjusted left and right, ranging from
-30°to 30°, and please do not adjust manual.
SAFETY CONTROL
Rotating button
Your heater is fitted with a safety device that switches off the heater
by thermal cut-off in the event of overheating or malfunction, It will
reset while the temperature reduce to a normal level.
If overheating or malfunctions continue, return the heater to an
Approved Service Agent for examination.
The most common cause of overheating is deposits of dust or fluff
entering the heater. Ensure these depostis are removed regularly by
unplugging the unit and vacuum cleaning air vents and front grille.
11. Ensure no other appliances are plugged into the same circuit as
your heater. A circuit overload could occur resulting in dimmed lights,
blown fuses, tripped circuit breakers, or fire hazard.
12. The heater is intended for household indoor use only.
13. The heater must not be located immediately below a
socket-outlet.
Warning: In order to avoid overheating, do not cover the
14.
heater.
15. Do not use this heater in the immediate surroundings of a bath, a
shower or a swimming pool.
DISPOSAL: Do not dispose of electrical appliances as
16.
unsorted municipal waste, use separate collection facilities.
Contact your local government for information regarding the
collection systems available. If electrical appliances are disposed of in
landfills or dumps, hazardous substances can leak into the
groundwater and get into the food chain, damaging your health and
well-being.
17. Children of less than 3 years should be kept away unless
continuously supervised. Children aged from 3 years and less than 8
years shall only switch on/off the appliance provided that it has been
placed or installed in its intended normal operating position and they
have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved. Children
aged from 3 yearsand less than 8 years shall not plug in, regulate and
clean the appliance or perform user maintenance.
18. CAUTION — some parts of this product can become very hot and
cause burns. Particular attention has to be given where children and
vulnerable people are present.
WARNING: IN ORDER TO AVOID OVERHEATING, DO NOT COVER THE
HEATER.
CLEANING AND MAINTENANCE
1. Light accumulated dust may be removed from the heater with a soft
cloth. Wipe the exterior surfaces of the heater occasionally with a
" position, the unit works
cloth moistened (not dripping wet) with a solution of mild detergent
and water. Dry the case thoroughly with a soft dry cloth before
operating the heater.
2. The fan motor is lubricated by the factory, and will require no
further lubrication.
3. No other user maintenance is required or recommended. If service
is required, send your heater to the nearest authorized service center.
4. Store heater in a clean and dry place when not in use.
REMEMBER - Portable electric heaters are designed for spot heating,
or as a supplementary heat source. They are not intended to be main
sources of heat during the normal heating season.
Note: There may be smoke or odour when unit is first operated. Do
not be alarmed. This indicates that a drop of oil fell on the heating
element during the manufacturing process. It will quickly evaporate,
and should not re-occur. This product can not be put on the ground
directly.
PRODUCT SPECIFICATIONS
Model: TMFH020
Voltage: 220-240V ~
Power: 1000W
Weight: 1060g
Frequency: 50-60Hz
Size: 163 x 152 x 184 mm
Publicidad
