Publicidad
Mount the screen using the keyole fixings (suitable for screens with VESA 75 x 75mm or
4
100 x 100mm fixings). Insert halfway 2pcs M4 x 12mm screws (Part A) into the upper
VESA fixings on rear of screen with 6mm overhanging.
Mount screen onto VESA plate (Part 3). This procedure may require 2 persons.
3
Attach the remaining 2pcs M4 x 12mm screws
5
into the lower VESA fixings holes of the screen
and then tighten all screws, securing screen to
mount.
Rotation
360 degrees
TIGHTEN
6
VESA PLATE
Rotation
360º
Tilt
+10º / -10º
A
A
If required, position the angle of the
6
screen by adjusting the mount
tension using the supplied S13mm
socket wrench (Part 7) to adjust
resistance.
Clockwise to increase tension
Counter-clockwise to decrease
tension.
6mm
Publicidad
