Publicidad
i) Mount the screen using the keyhole fixings (Suitable for screens with VESA 75 x 75mm or
4
100 x 100mm fixings). Insert halfway 2pcs M4 x 12mm screws (Part 11) into the upper
VESA fixings on rear of screen with 6mm overhanging.
ii) Hook the screen onto VESA plate (Part 1). This procedure may require 2 persons. If a level
back-to-back screen installtion is required, mount the first screen onto the lower VESA plate.
iii) Attach 2pcs M4 x 12mm screws into the lower VESA fixings holes of the screen and then
tighten all screws, securing screen to mount.
1
VESA PLATE
i) To mount the second screen follow step 2. To have a level back-to-back screen
5
installation, attach adaptor arms (Parts 4 & 5) to the second screen using 4pcs M4 x 12mm
screws (Part 11) and insert halfway 2pcs M4 x 8mm (Part 10) to the top of the arms
4mm overhanging
ii) Once mounted insert the bottom 2pcs M4 x 8mm screws to secure screen to mount.
iii) Adjust the screen angle (if required).
10
11
4
If required, adjust the mount tension by using
6
the supplied S13mm socket wrench (Part 9)
to adjust mount tension.
Clockwise to increase tension and
Counter-clockwise to decrease tension.
6
11
before mounting screen to the upper VESA plate keyhole fixings.
10
5
6mm
with
Rotation
Rotation
360º
360º
TIGHTEN
10
Tilt
Tilt
+10º / -10º
+10º / -10º
Rotation 360º
Publicidad
