IFU_MO_ACCESSIMO_0828466_EO_Mise en page 1 19/07/10 13:26 Page6
• Place the hand blender shaft in the mixture, immersing only the head,
turn the appliance on and leave to blend.
• There is no need to pound the mixture to achieve a good result.
150ml mini mincer
• Before using the 150 ml mini mincer, carefully place the cutter (E2) into
the bowl (E3) on the central drive. Place the ingredients in the bowl. Fit
the cover (E1) onto the bowl and then fit the motor unit (A) onto it.
(fig. 5)
• To remove the accessory after use, remove the motor unit (A) from the
cover (E1), then carefully remove the cutter (E2) (holding it by the
plastic part), then remove the ingredients.
• This 150 ml mini mincer can be used to chop herbs and mince meat. With
this accessory you can mince 70 g of raw chicken fillet in 3 seconds.
CLEANING
• Always unplug the appliance from the electrical power supply before
cleaning.
• Do not spray or immerse the motor unit in water. (fig. 6) Wipe it with
a dry or slightly damp cloth.
• All of the accessories, except for the motor unit (A), can be washed in
hot water or the dishwasher.
Be careful when cleaning the cutter (E2), it is very sharp.
ACCESSORIES
You may purchase the following accessories from your dealer or an appro-
ved centre:
- 150 ml mini mincer (E):
- 0.8L beaker (D):
To order accessories, please bring the leaflet with you or indicate your ap-
pliance's serial number (DDXXXXXX or HBXXXXXX).
Help save the environment!
i
‹
ref MS 5981762.
ref MS 4946320.
Your appliance contains a number of materials that can
be recovered or recycled.
Take them to a local civic waste collection point so that
they can be processed.
6